Why Can One Animal’s EID Be Missed During Automatic Reading?
In livestock handling and weighing systems, an EID panel reader is often installed to identify animals as they pass through a race or handling area. However, a missed reading can still occur, even when the reader is operating normally.
Understanding the factors that lead to missed readings helps equipment manufacturers and installers achieve more reliable identification in practical applications.
1. Ear Tag Position and Orientation
An EID tag is attached to an animal’s ear, which moves as the animal walks, turns its head or changes direction. As a result, the tag’s position and orientation relative to the reader can vary while the animal passes through the reading area.
If the tag moves outside the effective reading zone, or its orientation is less favourable for the reader’s antenna, identification may become less reliable.
This is why the reader’s maximum specified reading distance should not be treated as a guaranteed reading distance in every position.
2. Animal Movement and Passing Conditions
Reading conditions can change when animals move through a race one after another.
The speed of movement, distance between animals and their individual paths all affect how consistently each tag enters the effective reading area. If an animal passes too far from the reader, or its tag does not remain within the effective zone long enough, a reading may be missed.
The actual result also depends on the reader’s antenna design and how the identification data is processed. A system should therefore be evaluated under the intended operating conditions, rather than only with a stationary tag.
3. Reader Positioning and On-Site Testing
Correct installation is essential for reliable EID reading. The reader’s height, position and orientation should be considered in relation to the animals’ normal movement path.
Before finalising the installation, test the system using the actual EID tags and the expected animal flow. Check readings from different tag positions and passing directions, and repeat the test with animals moving at normal operating speeds.
If missed readings occur, review the installation position and the effective reading area before changing other system settings.
Choosing a Panel Reader for Livestock Systems
HiRancher’s Low-Frequency EID Panel Reader is designed for fixed animal identification in livestock weighing and handling systems. It offers a reading distance of up to 90 cm, IP67 protection and RS232/RS485 communication interfaces, making it suitable for integration into demanding livestock environments.
For equipment manufacturers and system integrators, the key is not simply selecting a reader with a long specified reading distance. It is ensuring that the reader is correctly positioned and tested within the actual handling system.


